Ledge 65 Tension Fabric System light box banner frame profile is one of a range of profiles used to create our LED Lightboxes.
This profile can be fabricated into a rectangular frame with mitre cut corner joints. Corner joints are connected with two UA4399 folded 90° channel connectors. The rear channel can accommodate an infill panel up to 3mm maximum thickness. To increase the rigidity of an assembly the infill panel can be riveted to the profile’s rear leg around the perimeter of the frame.
This profile is only available as part of a light box assembly. Please contact our Sales Team for further details.
Available Downloads
UA10584 – Ledge 65 TFS.dwg
UA10584 – Ledge 65 TFS.dxf
UA10584 – Ledge 65 TFS.pdf
| Material Type | |
|---|---|
| Colour | |
| Finish | |
| Stock Profile Length | |
| Leg Thickness | |
| Profile Lock Compatible | |
| Angle Connector Compatible | |
| Technical Guide Available | |
| 2D or 3D CAD data available |
Ledge 65 Tension Fabric System light box banner frame profile is one of a range of profiles used to create our LED Lightboxes.
This profile can be fabricated into a rectangular frame with mitre cut corner joints. Corner joints are connected with two UA4399 folded 90° channel connectors. The rear channel can accommodate an infill panel up to 3mm maximum thickness. To increase the rigidity of an assembly the infill panel can be riveted to the profile’s rear leg around the perimeter of the frame.
This profile is only available as part of a light box assembly. Please contact our Sales Team for further details.
Available Downloads
UA10584 – Ledge 65 TFS.dwg
UA10584 – Ledge 65 TFS.dxf
UA10584 – Ledge 65 TFS.pdf